Solar + BESS Project in Joshua Tree

• LFP prismatic cells (REPT 280Ah)
• 16S2P configuration, 51.2V nom, 560 Ah, 28kWh Capacity
• Nuvation BMS and custom stack switchgear (link)
• Compression end plates to extend life of prismatic cells (link)
• Custom bus bars for 16S2P configuration (link)
• Sol-Ark 12kW Inverter (link)
• AC coupled solar PV 5kW-AC
• • Enphase micro-inverters
• Application
  • Time of Use Reduction
  • Recharge with solar only
  • Zero out meter from 5pm-8pm
  • Full house Backup via Sol-Ark

 Design it first!

Planning for the placement on the wall

Assembling the cells. Tighten the compression plates first, then the busbars

Getting closer!

Configuring the BMS

Ok, how do I program this inverter?